What does the Gizmo Guy Bluetooth Adapter do? A Bluetooth adapter is a device that allows a device without built-in Bluetooth capability to communicate with other Bluetooth devices. This can be useful if you want to connect a device, such as a printer or a speaker, to a computer or other device that does not have Bluetooth built in. The adapter plugs into a USB port on the device and communicates with the other Bluetooth device wirelessly, allowing you to connect and transfer data or audio wirelessly. Some Bluetooth adapters can also be used to add Bluetooth capabilities to a car audio system or home theater system, allowing you to connect your phone or other device wirelessly to the system for streaming audio.

How to add Bluetooth Adapter to stream music through older car radio?

To add a Bluetooth adapter to an older car radio to stream music wirelessly, you will need to follow these steps:

Purchase a Bluetooth adapter that is compatible with your car radio. Make sure to check the specifications of the adapter to ensure it will work with your car radio.
Install the adapter in your car. There are a few different ways to do this, depending on the specific adapter you have purchased. Some adapters plug directly into the car’s auxiliary input, while others may need to be connected to the car’s stereo system using an FM transmitter. Follow the manufacturer’s instructions for installing the adapter in your car.
Pair your phone or other device with the Bluetooth adapter. Once the adapter is installed, you will need to put it into pairing mode. This is usually done by pressing a button on the adapter or holding down a specific combination of buttons. Follow the manufacturer’s instructions for putting the adapter into pairing mode.
On your phone or other device, go to the Bluetooth settings and search for available Bluetooth devices. You should see the Bluetooth adapter listed as an available device. Select the adapter and follow the on-screen instructions to pair the device with your phone or other device.
Once the adapter is paired with your phone or other device, you should be able to stream music wirelessly to your car radio. Simply select the Bluetooth adapter as the audio output on your phone or other device and start playing music. The music should now be played through your car’s speakers

Kits and Tools you need to replace a old car radio

To replace an old car radio, you will typically need the following tools and supplies:

A new car radio: You will need to purchase a new car radio that is compatible with your car. Be sure to check the specifications of the new radio to ensure it will fit in your car’s dashboard and that it has the features and connectivity options you need.
Radio removal tools: Many car radios are held in place with special clips or screws, and you will need a set of radio removal tools to remove the old radio from the dashboard. These tools are typically inexpensive and can be purchased at an electronics store or online.
Wire stripper: You will need a wire stripper to strip the insulation off the ends of the wires that connect the radio to the car’s electrical system.
Electrical tape: You will need electrical tape to secure the connections between the wires and the new radio.
Screwdriver: You may need a screwdriver to secure the new radio in place, depending on the mounting method used by the manufacturer.
Owners manual: It’s always a good idea to have a copy of your car’s owners manual on hand, as it may contain specific instructions for removing and replacing the radio.

It’s important to note that the specific tools and supplies you will need may vary depending on the make and model of your car and the specific radio you are installing. Be sure to follow the manufacturer’s instructions carefully to ensure a successful installation.